WIFI Connected But No Internet! How to Fix?

It’s literally a puzzling and annoying instant when you have successfully wifi connected but no Internet. A problem we all have faced ones at least. You can connect to your Wifi network, but your internet is not working.

Today we are going to fix the wifi connected but no Internet issue in some easy steps. Most of the times, it is because of the changes in the settings of your device or the router, but the reason may not always be so superficial. So for this reason you have to try different ways to find the right one. Here are some verified options that’ll surely fix this issue.

wifi connected but no Internet
wifi connected but no Internet

First of all I’ll enlist the every minor reason that can result this issue, so that you can easily get to know every detail of them:

Causes of the WIFI Connected But No Internet!

  • Router Settings Issue
  • Internet Connection Problem
  • Device Issue
  • DNS Server Setting Issue
  • Wireless modes Problem
  • IP Address Issue
  • Old Version Network Driver

Now we will discuss all of them one by one, and through this you will surely sort out your related issue and cause at your own.

Router Setting Issue

Most of the times internet is working well on another device but not on yours, in that condition it suggests that problem within your device not in the router or system settings of Wifi.

And in many conditions it happens that your phone works well on another wifi of your office or any other place but not works well at your home connection. Then this suggests that problem lies within the wifi connection or router settings. So we will discuss the ways to sort it out.

  • First of all restart your Router of Wifi.
  • If restarting option not worked out then, reset the Router device.
  • Wait for 30 seconds to restart again.

Through this you can surely fix your router issue or simply contact the Connection customer service.

wifi connected but no Internet
wifi connected but no internet error

Internet Connection Problem

Occasionally, the WiFi connected but no Internet error may be because of the Internet connection issue, not due to any device. This can be happen due to cracked wires or cables, service down, or may be any other issue that you can’t fix out. Because it will not be a single connection problem.

It’s vital to know if the problem lies with your Internet service provider. For ensuring this, you need to check if the “Internet” light on the modem is blinking or not. Make sure, the power and router lights should be turned on. Also, ensure there’s nothing uncommon, such as the continuous trembling of lights.

If the lights are not blinking or if you see red light, contact your Internet service provider.

Device Issue

If other devices are running well on this connection, then there might be issue is with your device and you need to fix it.

First of all restart your device and check if that fixes the problem. As with the router, network and software issues often get fixed automatically with a simple restart trial.

If this will not worked out, here’s what you can try:

  • Right-click on the network icon in your menu tab at the bottom right-hand corner. Tap on “troubleshoot problems”
  • Windows will automatically diagnose the problem and will try to fix it for you.
  • If Windows is incapable to fix your problem, it will in some cases tell you what the problem is.
  • You can search for a solution to this problem online or you can ask professionals.

DNS Server Setting Issue

Most of the times, this DNS cache becomes ruined due to mechanical bugs or when illegal domain names are inserted by third-party software like viruses. Ads and banners on some sites also send mischievous code to corrupt your DNS cache.

This corrupted DNS cache stops you from connecting to the Internet because there is incompatibility in the IP address. To fix, you have to do this for DNS cache.

To do that,

  • Press Windows + R and enter “cmd.” This will open the command prompt.
  • Next you need to type the following command and tap enter:
  • ipconfig/flushdns

Wireless Modes Problem

The wireless mode and standard used by your router depends upon Internet speeds and coverage. Commonly, you can see standards such as 802.11g, 802.11n, 802.11b, and 802.11ac. These standards are defined by a society called IEEE, and it is done to confirm consistency across all router models. Otherwise, 802.11b is the oldest and the slowest while 802.11ac is the latest and the fastest.

So, there may be you have an old device that can connect only to 802.11b or 802.11g while your router is based on the latest 802.11ac. This makes a difference as the device cannot connect to the new standard.

To fix this out, the first step to fix this problem is to recognize your router information. Open command prompt and type “ipconfig.”

The default gateway will be your router’s IP address.

You can also get information through your GUI.

  • Go to Network and sharing center.
  • Select your router and double-click on it.
  • Tap on a button of “Details

The IPv4 address is your router’s IP. Following, put this IP address in your browser’s URL box. This will prompt for your identifications to log into the router. In most cases, it asks for the username and password, that is admin by default in majority of devices. Once you login successfully, look for the “wireless mode” possibility.

You’ll find it under “wireless settings,” though the GUI will be different for each router. Change the wireless mode to 802.11b and save the settings. Now, you need to restart your WiFi and see if it fixes the problem.

IP Address Issue

If resetting your DNS or setting a static DNS server didn’t worked and you have still the only device in the network that has its WiFi connected but no Internet! Then now we are going to reset the IP Address, or we are going to request a new IP Address from the router.

When your device connected to a network it will request an IP Address from the local router. It uses DHCP for this and the router has a puddle of IP Addresses accessible so network device doesn’t clash with each other.

To reset your network you can effort to simply reboot your device. Don’t close and open your device, but go to start and reboot it correctly. But if that doesn’t help then you need to try to manually reset the network:

  1. Press Windows key +X
  2. Choose command (admin) or PowerShell (admin)
  3. Put the following command netsh int ip reset.
  4. Reboot your computer

With this command, we can reset the TCP/IP protocol. After you restart your computer you should be able to connect to the internet again.

Old Version Network Driver

From time to time, an old, out-of-date, or corrupted network driver can be the cause of WiFi connected but no Internet error. Most of the times, a little yellow mark in your network device name or in your network adapter could specify a problem. If none of the above fixes work, these steps are value try, even if you don’t see the yellow mark.

To fix:

  • Tap Windows +R and type and “devmgmt.msc.” This will open your Device Manager.
  • Direct to “network adapters” and right-click on your network
  • Choose “update network driver.” You will get two options and here, pick “search automatically for updated driver software”

Next windows will try to automatically fix the network driver for you according to your compatibility.

Conclusion

I hope you become able to solve the WiFi connected but no Internet issue with the ways detailed in this article. If you have any questions or queries, then just feel free to comment below. Regards!

Also Try: